We were recently featured on the acclaimed radio show House Talk.
Search
Close this search box.

How a Pedestal Sump Pump Works

|
How a Pedestal Sump Pump Works
How a Pedestal Sump Pump Works

If you’ve been reading up on basement waterproofing methods, you’re probably at least somewhat familiar with sump pumps. They’re responsible for moving water that builds up in the ground away from your home. What you may not know is that there are a couple different variations of sump pumps: submersible and pedestal. In this post, we’ll explain how a pedestal sump pump works and what makes it different from other pump types.

The Setup

The motor of a pedestal pump is set at the top of a pole, which is attached to a pedestal base. This motor sticks out of the sump pump, while the pedestal sits at the bottom. Inside the pedestal is an impeller, which is a rotor-shaped piece that spins to suck in water that collects in the pit. As the water is pulled into the pedestal, it’s redirected out of the pit through a pipe attached the pedestal.

Activation

Pedestal pumps activate through a float that’s connected to an activation switch. Normally, the float is in a low-hanging position. When water comes into the pit through inlet pipes and reaches a certain threshold height, the float raises. As a result, the position of the activation switch changes, and the sump pump turns on.

The Difference

What distinguishes a pedestal pump from a submersible pump is that the motor has no contact with the water, so it doesn’t need a protective casing like a submersible pump does. Installation is therefore a simpler matter, and you don’t need to worry about leaks in the setup that could damage the motor. On the other hand, the sound of the motor working will be louder since it’s exposed in your basement rather than tucked away in the sump pit. It may also be a bit more prone to overheating since it doesn’t have water around it to naturally cool it as it works.

Ultimately, the type of sump pump you get is up to personal preference, though a waterproofing professional may advise one or the other, depending on each individual situation. If you need basement waterproofing in Chicago, IL, and a reliable sump pump installation, contact The Real Seal today. Setting up sump pumps as part of basement waterproofing systems is among our foremost areas of expertise, so you can count on us to get the job done right.

WRITTEN BY

Austin Werner

Austin Werner is the Owner of The Real Seal LLC, a basement waterproofing and foundation repair company. Austin believes that having a highly trained and happy team is the key to success. This is reflected through hundreds of 5 star customer reviews his company has received online.

2 Responses

  1. I was looking for essential information on this subject. The information was necessary as Im about to launch my very own portal. Thanks for providing a lacking link in my business. Anyway, in my language, there usually are not much good source like this.

Leave a Reply

Your email address will not be published. Required fields are marked *

privacy

RELATED POSTS

DOWNLOAD OUR FREE GUIDE

guide