Concrete leveling in Deerfield, Illinois includes lifting and leveling concrete slabs, patios, sidewalks, and driveways. This is done by using polyjacking in which polyurethane foam is used. It is a non-toxic process, faster and more durable than other concrete leveling solutions.

Why Does Concrete Settle?

Concrete settling can occur due to a variety of reasons, such as poor drainage, inadequate compaction, unfavorable site conditions, and tree roots. The most common cause of concrete settlement is when rainwater and gutter water wash debris out from underneath your driveway or sidewalk. The voids or pockets created as a result can cause concrete to settle.

Clay-rich soil, which contracts and expands in response to moisture content, is another factor that causes concrete to settle. The soil becomes unstable due to the changes in moisture content, which further causes the concrete to shift and sink.

Why Does Concrete Settle

Concrete Leveling Using Polyjacking

Your home’s concrete should be supported by soil that is as sturdy as the concrete itself. If not, it will be unable to support the weight of the construction. Moreover, if the problem is weak soil, the slab cannot be replaced.

Benefits of Polyjacking​

Fast Acting

Just 15 minutes after the foam injection, you can easily walk over the concrete slab. The slab is sturdy enough to accommodate vehicular traffic as well.

Minimally-Invasive

The process can be minimally invasive for owners as it does not involve any major excavation or digging.

Lightweight

The foam is composed of lightweight polyurethane. In contrast to other leveling techniques like mudjacking, which uses heavy materials causing future soil settlement.

Environmentally Friendly

The foam used for polyjacking does not react to moisture. Moreover, it does not let any dangerous substances seep into the ground.

Cost-Effective

Owners can easily save up to 50% of the traditional concrete slab replacement costs if they go for concrete leveling by polyjacking.

Waterproof

Polyurethane foam is not affected by water easily once it's been settled. It is completely waterproof and durable.

Types of Concrete Leveling​

Patios

Driveways

Pool decks​

Sidewalks​

Foundations

Concrete Steps​

Porches​

Garage floors​

What Is The Process Of Polyjacking Concrete Leveling?

Polyjacking is performed through a simple, three-step process. Here’s how it works:

Concrete Leveling

Step 1: Drilling Holes

First, we drill dime-sized holes in the sunken concrete surfaces.

Concrete Leveling

Step 2: Injecting Polyurethane Foam

Next, we inject durable polyurethane foam through the holes beneath the concrete.

Concrete Leveling

Step 3: Stabilization

Lastly, we wait for the polyurethane foam to expand. As it expands and hardens, it lifts the slab, stabilizing your concrete surface.

The polyurethane foam we use in polyjacking is nonorganic and doesn’t erode or decompose over time. So, the polyjacking process is a long-lasting and useful solution for sinking concrete.

Customer Reviews