We were recently featured on the acclaimed radio show House Talk.
Close this search box.
Concrete leveling in Barrington is a process to lift and level sinking concrete slabs, decks, or, sidewalks, using expanding polyurethane foam. It is known as polyjacking, a non-toxic method that’s faster and stronger than other concrete leveling solutions like mudjacking.

Why Does Concrete Settle?

Concrete settles for numerous reasons, including poor drainage, bad site conditions, low-quality compaction, and unwanted tree roots. The most common reason we see is when the rainwater or water from gutters washes away dirt from under your sideways and driveways. It creates voids or pockets beneath the concrete surface, which causes it to settle.

Another factor that may allow the concrete to settle is clay-rich soil. The soil expands when it’s saturated with water. Then when the soil dries out, it shrinks. Due to such changes in moisture content, the soil becomes unstable. This instability in the soil makes the concrete move and sink.

Why Does Concrete Settle

Concrete Leveling Using Polyjacking

The soil under the concrete must be strong enough to support the weight. If the problem is weak soil, replacing the concrete slab can’t fix anything.

Benefits of Polyjacking​

Fast Acting

15 minutes after injection, the concrete slabs become ready to use. You can walk over the concrete slab or run vehicular traffic.


The polyjacking process doesn’t require any excavation.


The lightweight polyurethane foam doesn’t contribute to further soil settlement, whereas other processes like mudjacking include heavy materials that make the soil settle.

Environmentally Friendly

The foam used in the polyjacking process doesn’t react with soil or moisture. And it doesn’t add any harmful chemicals to the ground.


Once you opt for the polyjacking process, you can save up to 50% of the total cost of traditional concrete slab replacement.


Once the process is done, the polyurethane foam won’t wash away or get affected by water.

Types of Concrete Leveling​



Pool decks​



Concrete Steps​


Garage floors​

What Is The Process Of Polyjacking Concrete Leveling?

The process involves some important  steps:  

Concrete Leveling

Step 1

Dime-sized holes are drilled into the sunken concrete areas.

Concrete Leveling

Step 2

Polyurethane foam is injected through the holes beneath the concrete.

Concrete Leveling

Step 3

The foam underneath the concrete expands, lifting the slab.

The polyurethane foam we use in polyjacking is nonorganic and doesn’t erode or decompose over time. So, the polyjacking process is a long-lasting and useful solution for sinking concrete.

Customer Reviews