Concrete leveling in Barrington is a process to lift and level sinking concrete slabs, decks, or, sidewalks, using expanding polyurethane foam. It is known as polyjacking, a non-toxic method that’s faster and stronger than other concrete leveling solutions like mudjacking. Contact our Chicago-based foundation repair company, The Real Seal, for a quote on your concrete leveling project.

Why Does Concrete Settle?

Concrete settles for numerous reasons, including poor drainage, bad site conditions, low-quality compaction, and unwanted tree roots. The most common reason we see is when the rainwater or water from gutters washes away dirt from under your sideways and driveways. It creates voids or pockets beneath the concrete surface, which causes it to settle.

Another factor that may allow the concrete to settle is clay-rich soil. The soil expands when it’s saturated with water. Then when the soil dries out, it shrinks. Due to such changes in moisture content, the soil becomes unstable. This instability in the soil makes the concrete move and sink.

Concrete Leveling In Barrington, IL

Concrete Leveling Using Polyjacking

The soil under the concrete must be strong enough to support the weight. If the problem is weak soil, replacing the concrete slab can’t fix anything.

Benefits of Polyjacking​

Fast Acting

15 minutes after injection, the concrete slabs become ready to use. You can walk over the concrete slab or run vehicular traffic.

Minimally-Invasive

The polyjacking process doesn’t require any excavation.

Lightweight

The lightweight polyurethane foam doesn’t contribute to further soil settlement, whereas other processes like mudjacking include heavy materials that make the soil settle.

Environmentally Friendly

The foam used in the polyjacking process doesn’t react with soil or moisture. And it doesn’t add any harmful chemicals to the ground.

Cost-Effective

Once you opt for the polyjacking process, you can save up to 50% of the total cost of traditional concrete slab replacement.

Waterproof

Once the process is done, the polyurethane foam won’t wash away or get affected by water.

Types of Concrete Leveling​

Patios

Driveways

Pool decks​

Sidewalks​

Foundations

Concrete Steps​

Porches​

Garage floors​

What Is The Process Of Polyjacking Concrete Leveling?

Polyjacking is performed through a simple, three-step process. Here’s how it works:

Concrete Leveling

Step 1: Drilling Holes

First, we drill dime-sized holes in the sunken concrete surfaces.

Concrete Leveling

Step 2: Injecting Polyurethane Foam

Next, we inject durable polyurethane foam through the holes beneath the concrete.

Concrete Leveling

Step 3: Stabilization

Lastly, we wait for the polyurethane foam to expand. As it expands and hardens, it lifts the slab, stabilizing your concrete surface.

The polyurethane foam we use in polyjacking is nonorganic and doesn’t erode or decompose over time. So, the polyjacking process is a long-lasting and useful solution for sinking concrete.

Customer Reviews